An Introduction to the C-FLUOR Logger

Introduction-C-FLUOR-Logger

 

Precision Measurement Engineering is proud to partner with Turner Designs in unveiling the C-FLUOR, the latest line of fluorescence and turbidity water monitoring probes. The C-FLUOR Logger powers and logs the data output from the Turner Designs C-FLUOR Sensor. The C-FLUOR Logger is faster at taking measurements and more energy efficient than its previous iteration, PME’s Cyclops-7 Logger. Our C-FLUOR’s single sensor interchangeable design offers a cost effective and reliable platform for your aquatic research.

Though similar in appearance to the Cyclops-7, the C-FLUOR’s lower power consumption and faster response times allow for significantly longer deployment times and the ability to log measurements in quicker succession. However, unlike the Cyclops-7, the C-FLUOR arrives pre-calibrated and ready for deployment. See tables below for full comparison of the two products.

Comparison of the C-FLUOR and Cyclops-7 Loggers

C-FLUOR Logger

Cyclops-7 Logger

Application
MDL
Linear Range
MDL
Linear Range
Chlorophyll (blue ex) 0.03 μg/L 0 – 100 μg/L 0.03 μg/L 0 – 500 μg/L
Chlorophyll (red ex, High CDOM) 0.3 μg/L 0 – 500 μg/L 0.3 μg/L 0 – 500 μg/L
Phycocyanin 0.8 ppb 0 – 4,500 ppb 2 ppb 0 – 4,500 ppb
Phycoerythrin 0.1 ppb 0 – 700 ppb 0.1 ppb 0 – 750 ppb
Turbidity 0.1 NTU 0 – 200 NTU 0.05 NTU 0 – 1,500 NTU
Rhodamine 0.03 ppb 0 – 200 ppb 0.01 ppb 0 – 1,000 ppb
Fluorescein 0.02 ppb 0 – 150 ppb 0.01 ppb 0 – 500 ppb
CDOM/FDOM 0.2 ppb QSE 0 – 500 ppb QSE 0.1 ppb QSE 0 – 1,500 ppb QSE
Oil – Crude 0.2 ppb PTSA 0 – 300 ppb PTSA 0.2 ppb PTSA 0 – 1,500 ppb PTSA
Optical Brighteners 0.08 ppb Uvitex (OBA) 0 – 300 ppb Uvitex (OBA) 0.6 ppb PTSA 0 – 2,500 ppb PTSA

 

Specifications

C-FLUOR Logger

Cyclops-7 Logger

Input Voltage 3 – 15 VDC 3 – 15 VDC
T99 < 0.6 seconds < 1 second
Gain 1 3
Data Out 0 – 5 VDC 0 – 5 VDC
Depth Rating 100 meters 100 meters
Dimensions 22.3 mm x 132.4 mm 22.3 mm x 144.8 mm (Stainless Steel and Titanium)
Weight 89 grams 142 grams
Connector 6-pin Titanium 6-pin Stainless Steel or Titanium
Housing Material Titanium Stainless Steel or Titanium or Delrin (bigger)
Power 140 mW @ 12V; Turbidity 120mW @12V 120 – 540 mW @ 12V
Factory Calibration Yes No

Additional Product Features

An optional anti-fouling wiper is available to combat the accretion of biofouling on the face of the sensor, keeping measurements precise and reliable over the entire time of deployment.

With field replaceable batteries, factory calibrated sensors, and on-board plug and play software, the C-FLUOR is user-friendly while maintaining sensitive and reliable measurements.

Order Your C-FLUOR Logger Today

Is a C-FLUOR Logger the right instrument for your next research project? Contact PME today to order yours! If you still have questions regarding the new logger and how it can support your research, reach out to us and our team will be happy to answer all your questions.