SCAMP is a portable, lightweight microstructure profiler designed to measure extremely small scale (order 1 mm) fluctuations of electrical conductivity, temperature, and chlorophyll concentration in lakes, reservoirs, estuaries and oceans.
Here are the SCAMP Toolbox files, compiled for a Windows operating system on a 64-bit computer.
FYI: I followed the instruction in the webpage: http://www.mathworks.com/help/matlab/matlab_external/building-mex-files.html The softwares used...
PME maintains a google group for the purposes of implementing a list server. Any email sent to the list address will be resent to the list after...
Hi all SCAMP users, I would like to know how to tell what a good Batchelor fit is. The attached has three Batchelor fit plots. I know the plot on...
This is a somewhat difficult concept. Circuits within SCAMP measure temperature using a thermistor and produce a voltage. This voltage goes to...
SCAMP electronics has a internal clock. This clock forgets what time it is whenever SCAMP's AA batteries are removed. SCAMP's clock is...
The math here is really complex and just out of my league so I don't have a good answer for you. You'll have to read the reference given in s_ddt.m....
Instructions for Using SCAMP with computers running Windows 7 OS: *note: this should work for 64-bit as well as 32-bit operating systems. 1....
SCAMP alkaline batteries will last about 4 hours. At 10 cm/s and 100 sample/sec this is about 1400 meters of profiling. You get 1000 scans per...
SCAMP is designed to acquire individual profiles of up to 100 meters in length. Sometimes customers have situations where they would like to turn...
(Reply by Andreas Lorke) The problems with the dissipation measurement in environmental systems is the strong intermittency and variability of...
SCAMP collects raw file of measurements each profile. This raw file contains calibration information and also the a/d outputs obtained during the...
At the time of this writing (Oct 2010) there are roughly 60 SCAMPs in customer hands around the world. Of these 4 have been lost. This posting...
I have attached an application note to this posting that gives the details. I will appreciate any feedback, especially concerning errors that must...
SCAMP arrives with software to control the SCAMP and software to process the data. The control software is the Control.exe program and the...
SCAMP's I/O cable, especially the PAR I/O 'Y' cable, is subject to water entry at the connector or mechanical damage. From time to time this I/O...
Noise in electronic systems mostly comes from random conduction current variations (Johnson and 1/f noise) in the sensors and from currents not...
The SCAMP manual has a Velocity & Gradient Gain Adjustment section in the Profiling with SCAMP section. If you have read this section and are still...
The basic reason to use the cardboard box is F = ma. The trick with packaging is to limit F on SCAMP and since you can't do anything about...
SCAMP communicates with a host computer via a USB serial port. In order to do this the proper driver must be installed on the host computer and also...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
