The T-Chain's Pressure Transducer is a strain-gage transducer that converts pressure into a format that can be uploaded along the T-Chain. This Pressure Transducer is only compatible with PME's T-Chain.
The Pressure Transducer is designed to be the last sensor on a T-Chain and must be located at the end of the T-Chain opposite the under water connector. This sensor is an absolute pressure sensor and is available in three pressure ranges.
Specifications
Full Scale Absolute Pressure
5, 10, 20 bar
Accuracy
0.5% FS (5, 10 bar)
1% FS (20 bar)
Precision Measurement Engineering, Inc.
1487 Poinsettia Ave. Suite 129
Vista, CA 92081
