Connect the T-Chain to a Campbell Data Logger

The T-Chain has been configured to be compatible with Campbell Scientific data loggers. Compatible data loggers include the CR-800 Series, CR1000 Measurement and Control datalogger and CR3000 Micrologger.

The chain can be connected to the Campbell data loggers by using either the RS 232 port or by using the SDM-SI01 Module and SC110 Cable.We recommend using the RS 232 port if your T-Chain has a time response over four seconds. If you would like a T-Chain with a time response under four seconds, we recommend using the SDM-SI01 module and SC110 cable.

Hardware Set Up

Software Set Up